Safety precautions during precision CNC turning parts processing

The turning of precision CNC turning parts is one of the most widely used in the machine manufacturing industry. There is a wide range of processing, and there are many tools and fixtures used, so precision CNC turning parts are turning. The security technical issues of the country are particularly important.

Here is the content list:

l  Precision CNC turning parts chip damage and protective measures

l  Assembly of precision CNC turning parts

l  Safe operation

Precision CNC turning parts chip damage and protective measures

Lathe processing of various parts of good toughness steel material, turning chips generated during full plastic curled edges are sharp. When cutting precision CNC turning parts at high speed, it will form red hot and long chips, which are very easy to hurt people. At the same time, they are often wound on precision CNC turning parts, turning tools, and tool holders. Therefore, you should always use iron hooks in time. To clean or pull off, stop and clean if necessary, but never use your hands to clean or pull off. To prevent chip damage, chip breaking, chip flow control measures, and various protective baffles are often taken.

Assembly of precision CNC turning parts

In the process of turning precision CNC turning parts, many accidents damage the machine tool, break or damage the tool due to improper clamping of precision CNC turning parts, and cause the precision CNC turning parts to fall or fly out and injure people. Therefore, to ensure the safe production of precision CNC turning parts, special attention must be paid when mounting the workpiece. For precision CNC turning parts of different sizes and shapes, suitable fixtures should be selected, regardless of whether the three-jaw, four-jaw chuck or the connection between the special fixture and the spindle must be stable and reliable. The precision CNC turning parts should be clamped and clamped. For large workpieces, sleeves can be used to ensure that the precision CNC turning parts will not shift, fall off, or be thrown out when the precision CNC turning parts are rotated at high speed and subjected to cutting force. Available when necessary, top, center frame, such as enhanced trim. Remove immediately after clamping the wrench.

Safe operation

Before working, check the precision CNC turning parts machine thoroughly and confirm that it is good before use. The clamping of precision CNC turning parts workpieces and tools ensures the correct position, firmness, and reliability. During the machining of precision CNC turning parts, the machine must be stopped when changing tools, loading and unloading precision CNC turning parts, and measuring workpieces. Precision CNC turning parts The workpiece must not be touched by hand or wiped with cotton thread when rotating. To appropriately selected cutting speed, feed, and depth of the hard, not allowed to overload processing. No precision CNC turning parts, tool fixtures, and other sundries should be placed on the head of the bed, the knife rest, and the bed surface. When you want to use the rasp turning to a safe location, the former right hand, left hand in the post, to prevent the sleeves involved. The precision CNC turning parts machine tool must have a dedicated person responsible for the use and maintenance, and other personnel must not use it.

If you have any inquiries for precision CNC micro turning small parts or CNC micro turning small brass alloy parts, please do feel free to contact us for a quotation.