Views: 0 Author: Site Editor Publish Time: 2021-08-15 Origin: Site
The processing of precision CNC turning parts is to change the shape and size of the precision CNC turning parts on the lathe, using the rotational movement of the precision CNC turning parts and the linear or curved motion of the tool. At the same time, the precision CNC turning parts are used to transform the CNC turning parts. Produced into precision CNC turning parts, and processed the precision CNC turning parts to meet the requirements of the drawings.
Here is the content list:
l Before operation
l In operation
l After operation
1 Strictly use protective equipment before work, tie up cuffs, no scarves or gloves, and female workers should put their defenses in their hats. The operator must stand on the machine foot pedal of the precision CNC turning parts.
2 Strictly check the bolts, stroke limits, signals, safety protection (safety) devices of the precision CNC turning parts of the machine tool, and the mechanical transmission parts and electrical parts of the precision CNC turning parts of the machine tool. Can be started.
3 All kinds of precision CNC turning parts machine tool lighting application safety voltage, the voltage shall not be greater than 36 volts.
1 The tools, clamps, tools, and precision CNC turning parts must be clamped firmly. All types of machine tools should be idling at low speed after starting up, and then they can be officially operated after everything is normal.
2 It is forbidden to put tools and other things on the track surface of the machine tool of precision CNC turning parts, and on the machine table of the machine tool of precision CNC turning parts. It is not allowed to remove iron filings by hand, and special tools should be used to clean them.
3 Before starting the machine tool of precision CNC turning parts, observe the surrounding dynamics. After the machine tool is started, stand in a safe position to avoid the moving parts of the machine tool and the splashing of iron filings.
4 When the machine tool of precision CNC turning parts is in operation, it is not allowed to adjust the speed change mechanism or stroke, and it is not allowed to touch the transmission part, the working surface of the precision CNC turning parts in motion, the cutting tool, etc., and it is not allowed to measure any Size, it is forbidden to pass or take tools and other items through the transmission part of the machine tool.
5 When the machine tool of precision CNC turning parts is found to have abnormal noise, it should be stopped for maintenance immediately, and it is not allowed to run forcibly or with illness, and the machine tool is not allowed to be overloaded.
6 During the processing of each machine part, strictly implement the process discipline, read the drawings, see the control points, the roughness of each part, and the technical requirements of the relevant parts, and determine the processing procedures for making precision CNC turning parts.
7 Stop the machine when adjusting the machine speed and stroke of precision CNC turning parts, clamping precision CNC turning parts workpieces and tools, and wiping the machine tool. It is forbidden to leave the work post when the machine tool of precision CNC turning parts is running. If you want to leave for some reason, you must stop and cut off the power supply.
1 The raw materials of the precision CNC turning parts to be processed and the processed finished products, semi-finished products, and waste materials must be stacked at the designated place, and various tools and knives must be kept intact and good.
2 After the machine tool of precision CNC turning parts is operated, the power must be cut off, the tool must be removed, the handles of each part must be placed in the neutral position, and the switch box must be locked.
3 Clean the equipment sanitary, clean the iron filings, and fill the guide rail with lubricating oil to prevent the machine tool from rusting of the precision CNC turning parts.