Precautions for CNC machining aluminum parts

Views:0     Author:Site Editor     Publish Time: 2021-10-04      Origin:Site

Precautions for CNC machining aluminum parts

CNC machining aluminum parts is a new kind of machining part. The working principle of CNC machining aluminum parts is to compile simple machining programs, convert manual operations into computer programming, and then use simple manual machining. Precautions for CNC machining aluminum parts. Here are some answers.

 

Here is the content list:

What should be paid attention to in CNC machining aluminum parts?

What should I pay attention to when using CNC to process aluminum parts in normal production?

 

What should be paid attention to in CNC machining aluminum parts?

First, for new molds, the processing drawings must meet the requirements, and the data of CNC machining aluminum parts must be clear.

Second, CNC machining aluminum parts have the conformity mark of the quality department. After receiving the program sheet, check whether the reference position of the CNC machining aluminum parts workpiece is consistent with the reference position of the drawing.

Third, judge the rationality of the programmer's choice of roughing or finishing tools according to the material and size of the CNC machining aluminum parts. If the tool is found to be unreasonable, the programmer should be notified immediately to make corresponding changes to improve the processing efficiency and the processing accuracy of the workpiece.

Fourth, the standard of the knife used for CNC machining aluminum parts: can be large and can be short. CNC machining aluminum parts to carry out precise and precise measurement of the aspect ratio of steel parts also ensures safe production of aspect ratios in steel parts.

 

 

What should I pay attention to when using CNC to process aluminum parts in normal production?

First, the margin on the top surface of the CNC machining aluminum parts is too large. When using a large knife to manually remove the margin, remember not to deepen the gong. 

Second, the most important thing for CNC machining of aluminum parts is the first tool, because if you operate and check carefully, you can know whether the tool length compensation, tool radius compensation, program, speed, etc. are wrong, to avoid damage to the CNC machining aluminum parts, tools, and machine tools.

Third, if there is an abnormal situation in the process of CNC machining aluminum parts, and you are not sure, you can hang it high to observe the process, and then decide the next action.

Fourth, NC technicians can adjust the traveling speed and rotation speed provided by the programmer during the CNC machining aluminum parts.

Fifth, during the CNC machining aluminum parts, the NC technician should check with the parts drawing to see if there is any abnormality.

Sixth, when the machine tool is in automatic operation or free, the operator should go to the workstation to learn about the programming status of the remaining CNC machining aluminum parts, prepare and grind appropriate tools for the next processing to avoid downtime.

Seventh, process errors in the CNC machining aluminum parts are the main reason for wasting time.

Eighth, in the process of CNC machining aluminum parts, attention must be paid to the wear of the tools, and the blades or tools should be replaced appropriately.

 

If you want to know more about CNC machining aluminum parts or CNC machining parts, you can come to consult. Our official website is http://www.jstindustry.com/.



Kunshan JST Industry Co., Ltd is a professional manufacturer of CNC machining parts, which were applied to the field of medical, aerospace & aviation, electronics, security & safety, industrial equipment and automotive.

Copyright © 2020 Kunshan JST Industry Co., Ltd

CONTACT US

   86-18915758793

   86-512-55260690

   info@jstindustry.com

   info_282418

   Carrolgu

   86-18915758793

 

PRODUCTS

GET IN TOUCH