Machine maintenance can make the machine precision to maintain the best state, extend the machine life. As a China Precision Machined Parts Manufacturer, We offer you some experience sharing to help you improve the maintenance and maintenance of CNC machine tools.
Professional CNC machining workers must:
1. Check the height of lubrication oil level to ensure the lubrication of machine tool. It is recommended to use T68# guide oil.
2. Check whether the cooling fluid in the cooling tank is sufficient and not added in time.
3. Check the oil level of the pneumatic triples, which is about 2/3 of the height of the whole tubing. The air and water in the filter tank of pneumatic triples are discharged by the drain switch every day.
4. Check whether the air blowing of the inner cone hole of the spindle is normal. Wipe the inner cone hole of the spindle with clean cotton cloth and spray light oil.
5. Clean the cutter arms and knives, especially the claws.
6. Clean the exposed limit switch and contact block.
7. Clean the cutting and oil pollution on the working table, machine tool and three-axis expansion shield.
8. Check all the signal lights and the abnormal warning lights.
9. Check whether there is leakage in the oil pressure unit pipe.
10. Clean the machine after the daily work is completed.
11. Keep the environment around the machine clean.
We supply high quility 5 Axis Precision Machined Military Part. If you have demand, welcome to contact us.